Hey there, let’s cut to the chase—if you’re reading this, you’ve probably got a wobbly steering wheel when you idle, a clunk under the hood when you shift, or that annoying rattle that only gets worse when you hit potholes. Chances are, your engine mounts are shot. But here’s the big question we get DMs about every single week: How long does it take to replace engine mounts? Engine Mount

As an engine mount supplier, I don’t just talk parts— I’ve watched techs grind through quick jobs, waited for parts backordered for 6 weeks, and even walked a DIYer through a mess that took him 3 days. So let’s break this down real, no jargon, no BS.
First, let’s set the baseline: Most professional garages will quote you 1 to 4 hours for a standard engine mount swap. That’s the ballpark, but it’s not one-size-fits-all. Here’s why it jumps around.
If a pro is working on a front-wheel-drive (FWD) sedan or SUV—think a Honda Civic, Toyota Camry, or even a compact pickup—they can usually lift the engine just enough to get to the mount. No fancy tools, no pulling the transmission. That’s a straight 1.5 to 2 hours job. I’ve seen our wholesale partners knock this out in 90 minutes flat when the car’s on a lift and all the bolts are rust-free (fingers crossed).
But rear-wheel-drive (RWD) or all-wheel-drive (AWD) cars? That’s a different story. Stuff like a Ford Mustang, Chevy Silverado, or Subaru Outback? The mounts are tucked way back near the transmission, or you have to pull the driveshaft just to access them. Add in rusted bolts that snap when you try to loosen ‘em, and suddenly that 2-hour job turns into 3 or 4. Last month, one of our long-time shop customers hit a broken bolt on a 2019 Silverado and had to torch it out—added 2 extra hours to the bill. That’s the kind of surprise that makes even seasoned techs sigh.
Now, if you’re a DIYer asking this? Let’s be 100% real here. A beginner who’s never touched car tools? Plan for 4 to 8 hours. Maybe more if you’re fighting rust or don’t have a jack and jack stands (please, don’t use a random ramp—safety first). I’ve had a guy call me panicking at 10 PM after 3 hours of messing with his 2018 Corolla because he couldn’t get the old mount out. Turned out he jacked the engine too high and it hit the firewall. Oops. If you’re a bit more clued in—done brake jobs, changed oil before—you can probably do it in 2 to 4 hours. But again, skip the cheap Harbor Freight jacks. Spend $50 on good stands; it’s worth not squishing yourself.
Wait, but what if it’s not just one mount? Sometimes, the passenger-side mount is the only bad one, but often, if one’s shot, the others are close behind. We see this all the time—someone comes in to buy 1 mount, then 2 weeks later, they’re back for the other two. If you’re replacing multiple mounts, add an extra 1 to 2 hours. The engine’s already jacked up, so techs just knock the others out while they’re at it. For DIYers, that means more time, but it’s way smarter to do ‘em all at once. Trust me, you don’t wanna go through this twice.
Now, let’s talk about the hidden factors that no one warns you about. First, rust. If your car’s from a state that salts the roads in winter, those mount bolts are gonna be fused like glue. I shipped a set of mounts to a shop in Minnesota last month, and they said it took twice as long because they had to soak every bolt in WD-40 for 24 hours before even starting. If you skip that prep, you’ll be snapping bolts and calling a tow truck.
Then there’s parts availability. We’re a supplier, so I know this pain. If you order a stock mount from us, most of the time it ships next day. But if it’s a specialty mount—like for a vintage car, or a heavy-duty truck with a modified engine—you might be waiting a week or more. And if you’re waiting on parts, your wait time goes up. No one can work on the car if the part’s not there. We’ve had customers push their install 3 times because the carrier lost their order. Annoying, but common.
Also, some cars are just built to make mount swaps a nightmare. I’m looking at you, VW Golf MK7. The engine mount is tucked behind the dashboard, and you have to pull half the dash to get to it. That job can take 6+ hours even for a top-tier tech. We get so many requests for those mounts, and every time, we remind people to budget extra time for the dash pull. If you don’t, you’ll end up paying way more than you planned.
Wait a second—what about the cost side? Because time and cost go hand in hand. A pro’s labor is like $100 to $150 an hour, right? So that 2-hour job is $200 to $300 in labor, plus the part. Our engine mounts are priced at a fraction of OE, so you save on parts too. But if that job turns into 4 hours, that’s $400 to $600. That’s why I always tell people: if your car’s a pain to work on, maybe just pay the extra money for a shop. The headache isn’t worth it.
Now, let’s talk signs you need to replace a mount, just so you’re not guessing. If your engine idles rough and vibrates so bad your passenger seat feels like it’s shaking, that’s a mount. If you hear a loud clunk when you put it in Drive or Reverse, that’s definitely a broken mount. If your steering wheel vibrates at idle? Don’t ignore that. We see so many people wait too long, and then the mount breaks completely—engine shifts, hits the firewall, and now you’re looking at a way bigger repair. That’s the time to act.
So, to recap: Pro job on a common FWD car: 1.5–2 hours. Pro job on RWD/AWD with no rust: 2–3 hours. Pro job with rust or specialty access: 3–6+ hours. DIY job beginner: 4–8 hours. DIY job intermediate: 2–4 hours. That’s the range.
Here’s the thing we stand by as a supplier: Engine mounts aren’t a “set it and forget it” part. They hold your engine in place, absorb vibration, make your drive smooth. Cheap mounts break faster, so invest in a good one—ours are tested to last 100k+ miles, which is way more than the cheap stuff you’ll find on Amazon.
If you’re looking to replace your mounts, don’t waste time on flimsy ones. We’ve got parts for almost every make and model, from compact cars to heavy-duty trucks. If you’ve got questions about fit, or want to know how long a job would take for your specific car, hit us up to connect for purchasing and more details.
And for the DIY crew: Double-check the fit of the mount before you start. There’s nothing worse than spending 4 hours only to realize the part doesn’t line up. We’ll help you confirm the right part for your car, no hassle.

At the end of the day, replacing engine mounts is a job that ranges from a quick after-work project to a full-day grind. Know your car, know your limits, and don’t cut corners on tools or parts. It’ll save you time, money, and a whole lot of stress.
Engine Mount References:
- Automotive Service Excellence (ASE). (2022). Engine Mount Replacement Best Practices. National Institute for Automotive Service Excellence.
- Society of Automotive Engineers (SAE). (2021). Vibration Isolation for Automotive Engine Mounts. SAE International.
- Car Care Council. (2023). Common Suspension and Drivetrain Repairs: Labor Time Guidelines. Car Care Council.
- Engine Components Manufacturing Association (ECMA). (2022). Engine Mount Durability and Replacement Intervals. Engine Components Manufacturing Association.
- Consumer Reports. (2023). DIY Auto Repair: Time Estimates for Common Engine Repairs. Consumer Reports.
Yuhuan Tongli Auto Parts Co., Ltd.
Yuhuan Tongli Auto Parts Co., Ltd. is one of the most experienced engine mount manufacturers and suppliers in China. With a professional production team, we are able to meet the needs of the majority of our customers. Please feel free to buy premium engine mount at competitive price from our factory.
Address: Wei Er Road, Automobile and Motorcycle Industrial Park, Yucheng Street, Yuhuan City, Zhejiang Province, China
E-mail: 13600574728@163.com
WebSite: https://www.tongliap.com/