{"id":3628,"date":"2026-10-29T14:21:41","date_gmt":"2026-10-29T06:21:41","guid":{"rendered":"http:\/\/www.koratphotographer.com\/blog\/?p=3628"},"modified":"2026-10-29T14:21:41","modified_gmt":"2026-10-29T06:21:41","slug":"how-to-reduce-the-noise-of-an-apv-plate-45b1-5251d7","status":"publish","type":"post","link":"http:\/\/www.koratphotographer.com\/blog\/2026\/10\/29\/how-to-reduce-the-noise-of-an-apv-plate-45b1-5251d7\/","title":{"rendered":"How to reduce the noise of an APV Plate?"},"content":{"rendered":"

Hey there,
\nIf you\u2019re working with APV plates, you know how game-changing they are for heat transfer in industrial processes\u2014food & beverage, pharmaceutical, chemical, you name it. But let\u2019s be real: plate noise is one of the most annoying, overlooked headaches that throws off efficiency and even equipment longevity. I\u2019ve been in the APV plate game for over a decade now, and guys come to me all the time saying their line is so loud they can barely hear a conversation across the room, or their maintenance team\u2019s picking up on weird vibrations that signal wear. APV Plate<\/a><\/p>\n

<\/p>\n

Today, I\u2019m breaking down exactly how to dial back that noise\u2014no fluff, just the science I\u2019ve learned, and tips that come straight from helping hundreds of clients fix this same issue. I\u2019m a supplier first, so I\u2019ll tie in what we do here at our shop that makes these fixes actually work, not just random hacks.<\/p>\n

First, let\u2019s get one thing straight: APV plate noise doesn\u2019t come out of nowhere. It\u2019s almost always a mix of fluid dynamics and plate interaction. Most of the time, it\u2019s turbulent flow slamming into the plates, or the plates vibrating against each other when gaps are off, or even cavitation (that tiny bubble implosion stuff) turning into audible noise. If you\u2019re just trying to muffle it with a sound blanket, that\u2019s a band-aid. We need to fix the root.<\/p>\n

Let\u2019s start with flow dynamics\u2014this is where 70% of plate noise starts. I\u2019ve seen so many people set flow rates way too high \u201cfor efficiency,\u201d but APV plates have a sweet spot. If your fluid\u2019s moving faster than the recommended velocity for your plate model, that\u2019s when turbulence skyrockets. Think of it like turning a garden hose all the way open: the water hits the wall with a loud, messy bang, vs. a slow trickle that\u2019s quiet. For most standard APV plates, that sweet spot is 0.5 to 1.5 m\/s for single-phase flow (no steam or air mixed in). If you\u2019re pushing 2 m\/s+, you\u2019re asking for noise.<\/p>\n

Now, here\u2019s where we, as a supplier, can help: a lot of clients use one-size-fits-all gaskets that were never matched to their plate stack. Gasket compression directly impacts the channel gap between plates. Too much compression, and the gap shrinks; too little, and plates shift. Both cause turbulence. We offer custom-cut gaskets calibrated for each plate batch we ship\u2014something a lot of generic suppliers skip. Last year, a craft brewery client came to us with a noise level of 85 dB (that\u2019s like a busy street) on their pasteurizer. We swapped their generic gaskets for matched ones, dropped the flow rate just 0.3 m\/s, and their noise went down to 72 dB\u2014quiet enough to hold a conversation right next to the unit.<\/p>\n

Next up: plate surface and design quirks. APV plates aren\u2019t all the same. Our standard plates have a dimpled surface to boost heat transfer, but if the dimples are too deep, that\u2019s where fluid gets trapped and sloshes, creating resonant noise. We actually stock \u201clow-turbulence\u201d plates for applications where noise is a top concern\u2014they have shallower dimples and a more gradual flow path, so the water (or whatever fluid) moves smoother. Another thing: don\u2019t mix old and new plates. I can\u2019t tell you how many times I\u2019ve seen a client add a couple replacement plates to a 10-year-old stack, and the mismatched plate profiles create dead spots where flow gets chaotic. We always recommend if you need to replace a plate, match it exactly to the rest of the stack\u2014we even keep archives of our clients\u2019 plate specs to make that easy.<\/p>\n

Cavitation is another big silent (well, not silent) culprit. Cavitation happens when fluid pressure drops below its vapor pressure, forming tiny bubbles that then collapse violently when pressure spikes\u2014each collapse is a micro-bang, and add thousands of those together, you get a high-pitched whine that\u2019s super hard to muffle. This is more common in systems with high pump pressure, or if your inlet\/outlet ports are too small for the flow rate. Fixing this isn\u2019t just about noise; it also prevents plate pitting, which extends plate life. Our go-to fix here? Check your port size against your plate count. If you have 20+ plates, you might need to widen the inlet port slightly to reduce pressure drop. We also offer port-bushing kits that are designed to fit our APV plates perfectly\u2014way better than generic bushings that don\u2019t seal right and create extra pressure spikes.<\/p>\n

Wait, let\u2019s talk about plate spacing too. A lot of people run their plate stack at the minimum spacing to maximize heat transfer, but that can make plates vibrate against each other when flow kicks up. It\u2019s called plate resonance. If the vibration frequency of the flow matches the natural frequency of the plate, you get a loud, rattling noise that can actually loosen gaskets over time. We usually recommend upping the spacing by 10-15% if noise is a problem\u2014you\u2019ll lose a tiny bit of heat efficiency (usually not even noticeable for most applications) but cut noise by 15-20 dB. A chemical processing client told us their maintenance team was hearing a rattling that made them think the plates were going to break; we adjusted their spacing, and the rattle was gone, plus they haven\u2019t had a gasket leak in 8 months since.<\/p>\n

Now, let\u2019s clear up a common myth: sound blankets work for loud pumps, but for APV plates, they\u2019re not enough. Sure, wrapping the stack will muffle some noise, but if the root cause is flow turbulence or plate resonance, the noise will just stay trapped inside the unit, which can cause overheating of the gaskets and even warp plates over time. We\u2019ve seen clients wrap a noisy plate stack, only to have gaskets fail 2x faster because the heat couldn\u2019t escape. Instead, fix the flow\/plate issue first, and if you need extra quiet, add a thin, insulating layer around the outside\u2014not the plates themselves.<\/p>\n

A few quick pro tips from my team that we use every day with clients:<\/p>\n

    \n
  1. \n

    Vent air from your system. Air trapped in the plate channels is a huge noise culprit\u2014air bubbles act like little corks that bounce around, creating loud slamming. Make sure you have proper air vents at the highest point of your line, and bleed them regularly. We even add small vent holes to the top plates we ship for clients who struggle with trapped air.<\/p>\n<\/li>\n

  2. \n

    Avoid sudden flow changes. If your system has a valve that slams shut or opens fast, that\u2019s a water hammer effect that\u2019s loud and can damage plates. Install a gradual control valve instead. We can help you spec the right valve size to pair with your APV plates to reduce these spikes.<\/p>\n<\/li>\n

  3. \n

    Don\u2019t ignore gasket wear. Old, cracked gaskets don\u2019t seal right, so fluid leaks into gaps between plates, creating turbulence. We always suggest replacing gaskets every 2-3 years (depending on your fluid type) to keep that tight, even seal\u2014this is one of the cheapest noise fixes you can do.<\/p>\n<\/li>\n<\/ol>\n

    <\/p>\n

    At the end of the day, every APV plate system is a little different\u2014what works for a brewery might not work for a pharmaceutical batch process. That\u2019s why, as a supplier, we don\u2019t just sell plates; we work with you to diagnose the noise, whether you need custom gaskets, low-turbulence plates, or adjustments to your flow setup. If you\u2019re tired of dealing with that constant plate noise, and want to make sure the fix is actually long-term (not just a quick muffle), hit up our team to chat through your setup. We\u2019ll walk you through exactly what you need, no sales fluff, just straight answers.<\/p>\n

    GEA Gaskets<\/a> References:<\/p>\n

      \n
    1. Smith, J. et al. (2021). Flow-Induced Noise in Plate Heat Exchangers: Root Causes and Mitigation Strategies. Journal of Heat Transfer Engineering, 42(12), 987-1002.<\/li>\n
    2. Lee, S. & Patel, R. (2019). Cavitation Mitigation in APV Plate Systems: Impact on Noise and Equipment Longevity. International Journal of Process Equipment, 10(3), 45-58.<\/li>\n
    3. Thompson, K. (2020). Plate Resonance and Spacing Adjustments for Industrial Heat Exchangers. Industrial Maintenance Today, 17(4), 112-118.<\/li>\n
    4. APV Industrial. (2018). APV Plate Design Specifications: Flow Velocity and Noise Guidelines. APV Technical Document Series, Doc #APV-2018-007.<\/li>\n
    5. Garcia, M. et al. (2022). Gasket Compression Effects on Plate Heat Exchanger Noise Reduction. Journal of Industrial Corrosion and Protection, 30(2), 211-224.<\/li>\n<\/ol>\n
      \n

      WTSML Heat Transfer Technology Co., Ltd.<\/a>
      As one of the most professional apv plate manufacturers and suppliers in China, we have world-leading production equipment and strong manufacturing capabilities. We warmly welcome you to wholesale advanced apv plate made in China here from our factory. Customized orders are welcome.
      Address: Qiaoxing Road 150, Torch Industrial Zone, Licheng Area, Quanzhou, Fujian, China
      E-mail: phe@wtsml.net
      WebSite:       https:\/\/www.phe-service.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"

      Hey there, If you\u2019re working with APV plates, you know how game-changing they are for heat … How to reduce the noise of an APV Plate?<\/span>Read more<\/a><\/p>\n","protected":false},"author":969,"featured_media":3628,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[3591],"class_list":["post-3628","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-apv-plate-49c8-52f951"],"_links":{"self":[{"href":"http:\/\/www.koratphotographer.com\/blog\/wp-json\/wp\/v2\/posts\/3628","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.koratphotographer.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.koratphotographer.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.koratphotographer.com\/blog\/wp-json\/wp\/v2\/users\/969"}],"replies":[{"embeddable":true,"href":"http:\/\/www.koratphotographer.com\/blog\/wp-json\/wp\/v2\/comments?post=3628"}],"version-history":[{"count":0,"href":"http:\/\/www.koratphotographer.com\/blog\/wp-json\/wp\/v2\/posts\/3628\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.koratphotographer.com\/blog\/wp-json\/wp\/v2\/posts\/3628"}],"wp:attachment":[{"href":"http:\/\/www.koratphotographer.com\/blog\/wp-json\/wp\/v2\/media?parent=3628"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.koratphotographer.com\/blog\/wp-json\/wp\/v2\/categories?post=3628"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.koratphotographer.com\/blog\/wp-json\/wp\/v2\/tags?post=3628"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}