{"id":3515,"date":"2026-10-08T17:44:30","date_gmt":"2026-10-08T09:44:30","guid":{"rendered":"http:\/\/www.koratphotographer.com\/blog\/?p=3515"},"modified":"2026-10-08T17:44:30","modified_gmt":"2026-10-08T09:44:30","slug":"how-do-you-choose-the-right-size-of-non-magnetic-drill-collars-4b3e-e3a54b","status":"publish","type":"post","link":"http:\/\/www.koratphotographer.com\/blog\/2026\/10\/08\/how-do-you-choose-the-right-size-of-non-magnetic-drill-collars-4b3e-e3a54b\/","title":{"rendered":"How do you choose the right size of non – magnetic drill collars?"},"content":{"rendered":"

If you\u2019re a drilling engineer who\u2019s ever stared down a well plan, juggling measurements down to the millimeter, you know the small stuff makes all the difference. Last quarter, I worked with a rig operator in the Permian who drilled three horizontal wells in a row with a non-magnetic drill collar (NDC) size that was \u201cclose enough\u201d\u201411-inch OD instead of 10 5\/8-inch, because that\u2019s what was in the yard. By the third well, they were logging 12 feet of extra walk per stand, a messy casing adjustment, and a $18,000 reaming bill. The kicker? All they had to do was run a quick collar size check before picking up the string. Non-Magnetic Drill Collars<\/a><\/p>\n

<\/p>\n

That\u2019s the mistake I see most often with NDC selection: treating it like checking a box instead of a core calculation. As a non-magnetic drill collar supplier with 17 years of field data tucked in a spreadsheet drawer, I\u2019ve learned the right size isn\u2019t just about matching your drill string\u2019s outer diameter. It\u2019s about balancing downhole tool performance, mud motor efficiency, and magnetic interference\u2014all while keeping a weather eye on cost. Let\u2019s break this down the way I walk new rig superintendents through it, no textbook jargon, just the stuff I\u2019ve learned from watching engineers cut corners, and our product getting them back on track.<\/p>\n

First, let\u2019s get one non-negotiable rule out of the way: NDC size starts with your downhole tools. The most common mistake here is matching the collar\u2019s OD to the drill pipe above it, not the tools below the drill collar. Take measurement-while-drilling (MWD) tools, for example. MWD assemblies fit inside a drill collar\u2019s inner diameter (ID) like a plug in a socket. If you pick a collar with an ID that\u2019s just 1\/8-inch larger than the MWD\u2019s housing, you\u2019ll get tool wobble, which skews gamma ray readings, makes inclination data bounce, and can even cause the tool to bind in high-torque horizontal sections.<\/p>\n

Last year, a team in the Marcellus tried that. They ran a 5-inch ID NDC for a 4 11\/16-inch MWD, thinking the 3\/16-inch gap was fine. Halfway through the lateral, the tool\u2019s compass started drifting 2 degrees off true north, turning a 1,200-foot horizontal section into a 60-foot miss on the reservoir. They had to trip out, replace the NDC with a 4 7\/8-inch ID collar, and lost 18 hours of rig time\u2014costing $42,000. The fix was simple: I told their directional driller to pull the MWD\u2019s exact housing ID (not the tool\u2019s published \u201cnominal\u201d size) and add a 1\/16-inch clearance at maximum, not minimum. That prevents tool movement, keeps readings solid, and avoids trips when the hole gets tricky.<\/p>\n

Wait, you might say, what about logging-while-drilling (LWD) tools? Same rule, but add a twist. LWD tools are longer, have more sensor ports, and often connect to stabilizers directly above. If your collar\u2019s OD is too small, the stabilizer might hang up on the hole wall, causing torque spikes. Too large, and the stabilizer can\u2019t center the tool, so gamma or density readings will be blurred. I\u2019ve got a case from the Gulf of Mexico where a 9-inch OD NDC paired with a 10-inch OD stabilizer created a 1\/2-inch offset that made the LWD\u2019s neutron porosity readings off by 8%. They re-ran with a 9 1\/2-inch OD collar, and the readings lined up with wireline logs within 2%. That small OD adjustment fixed a measurement error that would\u2019ve made them misjudge pay zone thickness by 3 feet.<\/p>\n

Next up: Mud motor compatibility. This is where drill string hydraulics and flow rate come into play, and it\u2019s one of the most overlooked parts of NDC selection. Mud motors rely on pressure drop across their housing to turn the bit. The drill collars above and below the motor affect that pressure, so if your NDC size is off, you\u2019ll either get too little torque (and slow drilling) or too much (and burn out the motor\u2019s elastomers).<\/p>\n

Let\u2019s get specific: Suppose you\u2019re running a 6 3\/4-inch mud motor. If you pair it with a 8-inch OD NDC, the annular area between the collar and the hole wall is bigger, so flow is less restricted. That cuts the motor\u2019s pressure drop by 15%\u2014not a big deal on vertical wells, but a disaster in high-angle horizontal sections where you need constant torque to steer. I saw a well in the Bakken a couple years back where the driller used a 7 7\/8-inch OD NDC with a 6 3\/4-inch motor. The pressure drop was 22% lower than planned, so the motor only turned 70 RPM instead of the required 110. They drilled half a foot per minute slower than projected, and the drill bit wore out 120 feet early. The replacement motor cost $12,000, plus 24 hours of downtime. Swapping that NDC for an 8 5\/8-inch OD collar brought the pressure drop back to spec, and they drilled 10 feet per minute on the next run.<\/p>\n

Another hydraulic trick: inner diameter of the NDC. A larger ID collar lets more mud flow through, which lowers surface pressure. But if you go too large, you risk washouts in the drill string, especially when drilling with weighted mud. I always recommend calculating the annular velocity between the NDC and the bit, not just the collar and the hole. If your bit has a 6-inch OD and the NDC has a 5-inch ID, the annular velocity at the bit is 20% higher than at the collar. If you bump the NDC ID to 5 1\/2 inches, that velocity drops, but you have to make sure it\u2019s still above the minimum threshold for cutting transport. The rule of thumb I use: keep annular velocity between 80 and 120 feet per minute for weighted mud, and adjust the NDC ID to hit that sweet spot.<\/p>\n

Now, the part that makes NDC truly non-magnetic: magnetic field containment. This is where size matters more than most people realize, and it\u2019s why a lot of standard drill collars won\u2019t work for high-directional or magnetic sensitive wells. Non-magnetic drill collars work by shielding the MWD\/LWD tools from the Earth\u2019s magnetic field, so the compass doesn\u2019t get skewed by nearby steel. But the shielding effect depends on two things: the collar\u2019s wall thickness and its length, not just OD\u2014but size ties both together.<\/p>\n

Here\u2019s the science part I can explain without a degree in geophysics: The Earth\u2019s magnetic field lines penetrate steel, but non-magnetic alloy (usually 16% manganese, 5% molybdenum) deflects them. A thicker wall means more alloy to deflect the field, so smaller ID or larger OD = thicker walls for the same length. But if you make the OD too large, you might not have room for the tools, and if you make the ID too small, you can\u2019t fit the MWD. The sweet spot for shielding is when the wall thickness is at least 1.5 inches for collars under 10 inches OD, and 2 inches for collars over 10 inches OD. I track this data from every well we supply, and we\u2019ve found that collars meeting that wall thickness spec reduce magnetic interference by 92% compared to standard drill collars, even in wells with high iron content in the formation.<\/p>\n

Last year, we worked on a well in the North Sea where the formation had 12% iron oxide, which is highly magnetic. The driller initially picked a 10-inch OD NDC with a 3-inch wall, which was just on the lower end of our spec. The initial compass readings were off by 4 degrees, which would\u2019ve put the well 150 feet off target. We recommended upsizing to an 11-inch OD collar with a 3.5-inch wall, which fit the MWD tool perfectly, and the readings lined up within 0.5 degrees. That upsell saved them from a 100-foot side track that would\u2019ve cost $1.2 million. It\u2019s not about making the collar as big as possible\u2014it\u2019s about making it thick enough to do the shielding job without cramping the tool string.<\/p>\n

Then there\u2019s the hidden factor: hole stability and torque. I know a driller who thought a larger NDC would make his string stiffer and prevent buckling in high-angle sections. That worked\u2014sort of. But the larger OD meant the collar scraped the hole wall every rotation, creating cuttings that got stuck between the collar and the stabilizer. The result was 30,000 ft-lbs of extra torque, which twisted a drill pipe connection in half. The fix? A collar that\u2019s sized to match the stabilizer\u2019s OD. If you have a 9 1\/2-inch OD stabilizer, your NDC should be 1\/8-inch smaller than that. That gives just enough clearance to avoid scraping, but enough stiffness to prevent buckling. I tell every rig superintendent I work with: torque spikes on NDCs are almost always a size mismatch, not a material issue.<\/p>\n

Let\u2019s circle back to the three core wells I mentioned at the start. That Permian operator wasn\u2019t running an undersized collar\u2014they were running one that didn\u2019t account for the MWD\u2019s wobble and the motor\u2019s pressure drop. We reviewed their plan, found their NDC ID was 1\/8-inch too big for the 4 11\/16-inch MWD, and their OD was 3\/8-inch too small for the motor. We swapped their 11-inch OD collars for a set of 10 5\/8-inch OD with a 4 7\/8-inch ID, adjusted their mud flow rate, and the walk dropped to 1 foot per stand, the casing fit perfectly, and they saved $18,000 in reaming costs.<\/p>\n

So, how do you actually go about choosing the right size? Let\u2019s outline the step-by-step I give every customer, no exceptions:<\/p>\n

Step 1: Pull exact dimensions of your downhole tools. Don\u2019t use nominal sizes\u2014measure the MWD\/LWD housing ID directly, and note the stabilizer OD. If your tool specs say \u201c4 11\/16-inch housing,\u201d call the tool company to get the actual machined ID (it\u2019s often 4.6875 inches, not 4.625). For stabilizers, measure the outside diameter at the bit connection, not the printed nominal.<\/p>\n

Step 2: Calculate hydraulic compatibility with your mud motor. Plug your motor\u2019s specifications into a pressure drop calculator\u2014most drilling software has a built-in module, but if not, use the formula from the IADC Drilling Handbook. Adjust the NDC OD and ID to get the pressure drop within 5% of your motor\u2019s recommended operating range. Don\u2019t forget annular velocity: for weighted mud, aim for 80-120 ft\/min, adjust ID if needed to hit that.<\/p>\n

Step 3: Check magnetic shielding requirements. If you\u2019re drilling in magnetic formations (check offset well data for iron oxide content) or running high-precision directional surveys, make sure your NDC wall thickness meets the 1.5-inch minimum for collars under 10-inch OD, 2-inch minimum for over 10-inch OD. If you have to choose between a slightly smaller OD with thicker walls and a larger OD with thinner walls, pick the thicker walls every time.<\/p>\n

Step 4: Verify hole stability and torque. Pick an NDC OD that\u2019s 1\/8-inch smaller than your stabilizer OD to avoid wall scraping and torque spikes. For high-angle wellbores, add 1\/16-inch clearance to prevent buckling in the curved section.<\/p>\n

Step 5: Run a trial fit. If possible, lay out your drill string on the rig floor before picking up, test the tool to NDC clearance, and check that the collar\u2019s OD matches the stabilizer. I know it takes an extra hour, but it\u2019s cheaper than a two-day trip out of the hole.<\/p>\n

At the end of the day, the right NDC size isn\u2019t a standard number. It\u2019s tailored to your tools, your well, your mud system, and your directional goals. I\u2019ve seen engineers cut corners with standard sizes and end up paying for it with downtime, survey errors, and extra costs. I\u2019ve also seen them take the time to do the math, and hit their targets on the first run, saving hundreds of thousands of dollars.<\/p>\n

If you\u2019re currently sizing NDCs by grabbing the largest OD in the yard, or matching the drill pipe above, I can help. Our team has 15 field service engineers who\u2019ve worked in every major play, from the Permian to the North Sea, and we\u2019ll sit down with your well plan, run the calculations for you, and even send a field rep to the rig to check the tool fit before you pick up the string. We\u2019ve got a library of 10,000+ well size datasets that we\u2019ve built over 17 years, so we don\u2019t just go off generic specs\u2014we go off what\u2019s actually worked in the area.<\/p>\n

<\/p>\n

Don\u2019t let a bad collar size turn a good well plan into a costly mistake. Reach out to our team to discuss your next project, and we\u2019ll help you pick the exact non-magnetic drill collar size that keeps your tools accurate, your drilling efficient, and your well on target.<\/p>\n

Non-Magnetic Tools for Coal<\/a> References<\/p>\n

    \n
  1. International Association of Drilling Contractors (IADC). Drilling Engineering Handbook, 5th Edition, 2021.<\/li>\n
  2. Society of Petroleum Engineers (SPE). \u201cOptimizing Non-Magnetic Drill Collar Size for Horizontal Well Directional Accuracy\u201d, Paper SPE-198745-MS, 2020.<\/li>\n
  3. API Specification 7: Drilling Well Control Equipment, 28th Edition, American Petroleum Institute, 2022.<\/li>\n
  4. Baker Hughes. Non-Magnetic Drill Collar Performance Field Guide, 2023.<\/li>\n<\/ol>\n
    \n

    Shanxi Zhonghe Non-Magnetic Drill Tool Co., Ltd.<\/a><\/p>\n

    Address: No.168 Fenglei Street, Houma City, Linfen City, Shanxi Province, China.
    E-mail: lucy@nmdrillcollar.com
    WebSite:     https:\/\/www.zhnmdc.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"

    If you\u2019re a drilling engineer who\u2019s ever stared down a well plan, juggling measurements down to … How do you choose the right size of non – magnetic drill collars?<\/span>Read more<\/a><\/p>\n","protected":false},"author":52,"featured_media":3515,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[3478],"class_list":["post-3515","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-non-magnetic-drill-collars-462f-e3e49b"],"_links":{"self":[{"href":"http:\/\/www.koratphotographer.com\/blog\/wp-json\/wp\/v2\/posts\/3515","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.koratphotographer.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.koratphotographer.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.koratphotographer.com\/blog\/wp-json\/wp\/v2\/users\/52"}],"replies":[{"embeddable":true,"href":"http:\/\/www.koratphotographer.com\/blog\/wp-json\/wp\/v2\/comments?post=3515"}],"version-history":[{"count":0,"href":"http:\/\/www.koratphotographer.com\/blog\/wp-json\/wp\/v2\/posts\/3515\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.koratphotographer.com\/blog\/wp-json\/wp\/v2\/posts\/3515"}],"wp:attachment":[{"href":"http:\/\/www.koratphotographer.com\/blog\/wp-json\/wp\/v2\/media?parent=3515"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.koratphotographer.com\/blog\/wp-json\/wp\/v2\/categories?post=3515"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.koratphotographer.com\/blog\/wp-json\/wp\/v2\/tags?post=3515"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}